Spring has sprung in RI

[tnltracy]

Flowers are blooming, and we hit 92 degrees last week!




and with spring comes spring 'cleaning'

Heading into year two with my V, I've gotten my first real look around things now as I bought it in the water and took a chance what was below water level was ok (for the most part it was/is)

First projects this year are:

Teak. I don't think it's ever been touched in it's 31 years. Here's some pix:







Here's a before/ after look. From bottom up is:

• As removed from the boat
• Sanded
• Cleaned with teak cleaner
• Sealed with Cetol

That's an untouched cuddy hatch rail at the top too.


Used Cetol natural which I'm very happy with.


Also got the bottom sanded and painted and zincs replace, my marina does as part of storage. Glad they did it, was a barnicle utopia under there!

And got the bow eye and bow repaired and replaced. PO had run it into the dock and broke the bow eye off. luckily is was pretty rusted, so it bent more than broke the fiberglass. New one in now, so when I do trailer it I won't be worried about pulling it out of the hull.

Actual pictures of the v forthcoming

[nipper]

Nice post, but unfortunately, nothing but red x's. Looks like when I tried to post pix! Haven't tried since!

[tnltracy]

hopefully the pix are all visible now

[phatdaddy]

i also am a cetol fan, last about 4-5 years in the fl sun.
looks good

[willy]

Nice job, did you sand them down first?

[tnltracy]

Yes, sanded, cleaned with Teak cleaner first, then 3 coats of Cetol Natural. I'm very happy with the results. Now the power washing of the boat comes next before re-applying.

PO was a big fan of 5200, and it's all over the boat, he'd even re-attached some of teh teak when it had gotten pulled off around the rod boxes... So a good amount of sanding/grinding yet to come