Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #1  
Unread 06-10-2023, 04:43 PM
steplift20 steplift20 is offline
God
 
Join Date: Nov 2004
Location: Beautiful New Jersey the high taxes state
Posts: 3,042
Default 1984 50 hp Mercury carb issues

My 1984 50 hp outboard is shooting gas out from the top but since it's a side mount it's coming out from the side that would be the top
When it's at mid to full throttle it's ok but at idle it leaks bad and stalls
Is there anything I can do without removing the carb?
I put in a full can of seafoam to 2 gallons of gas and am running it with that hoping it would free up what is sticking,but do far all it does is smoke a lot
Any suggestions?
__________________
love to fish
Reply With Quote
  #2  
Unread 06-11-2023, 09:54 AM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Not familiar with that engine,
How many carbs and cylinders?

Never had much luck with mechanic in a can solutions, sounds like you need to pull carb and clean needle and seat.

Usually its easier to pull them all at once and clean them all.
Reply With Quote
  #3  
Unread 06-12-2023, 10:49 AM
steplift20 steplift20 is offline
God
 
Join Date: Nov 2004
Location: Beautiful New Jersey the high taxes state
Posts: 3,042
Default

2 carbs. 4 cylinders.
Hey phat,I haven't seen spareparts post anything lately, is he ok?
__________________
love to fish
Reply With Quote
  #4  
Unread 06-12-2023, 04:16 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Yeah I noticed he was MIA, also. Hope he s just super busy.

Not sure if that s a true Merc or a rebadged Yamaha, but I d just pull the carbs and clean them out. Should just be undo the choke and throttle linkage, then undo both carbs off the manifold and remove with the sync linkage still on them. Once you get them off, then break apart.

Probably a couple hundred YouTube videos to help you. I would go with OEM parts if you need to replace any.
Reply With Quote
  #5  
Unread 06-12-2023, 05:10 PM
steplift20 steplift20 is offline
God
 
Join Date: Nov 2004
Location: Beautiful New Jersey the high taxes state
Posts: 3,042
Default

Dam Phat,you make it sound easy, I wish I had your talent and spares too
I think what I'm going to do is remove the bowl and see if the float is stuck, that's about the most I feel comfortable with. After that ,I will bring it to a Mercury shop
First one guy at the Mercury shop said we can't do it cause it's a old (1984) outboard then I ask the mechanic and he said sure ,bring it down. I will let you know how I make out.
I hope spare is just busy ,nothing else .
Going out for fluke and blue fish tomorrow and weakfish too,yep weakfish.
__________________
love to fish
Reply With Quote
  #6  
Unread 06-13-2023, 08:49 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Good luck
Reply With Quote
  #7  
Unread 06-14-2023, 03:06 PM
steplift20 steplift20 is offline
God
 
Join Date: Nov 2004
Location: Beautiful New Jersey the high taxes state
Posts: 3,042
Default

Thanks phat I will post it on how it turns out
__________________
love to fish
Reply With Quote
  #8  
Unread 06-14-2023, 05:43 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

I was talking about the fishing,

I know you can handle the carbs
Reply With Quote
  #9  
Unread 06-16-2023, 06:25 PM
steplift20 steplift20 is offline
God
 
Join Date: Nov 2004
Location: Beautiful New Jersey the high taxes state
Posts: 3,042
Default

Fishing? Oh yeah what was I thinking
I'm fishing very very close to my marina and doing pretty good
Not going for stripers but catching cocktail blues and fluke and weakfish and not burning
8 gallons of gas maybe closer to 5 gallons
As far as the carb issue goes ,I think I'm going to have a problem, the motor is a 1984 50 hp and getting a carb girl it is going to be a challenge , I went to the marina where I live and they said they will try to help me but was told before that they can't.
So if you know anything or anywhere that I can get a carburetor for my engine let me know .
I'm still looking. I bet spare can fix it in his sleep and you too I bet , but me not do much. I will tell you how my fishing goes the next time I go out.
Later gator ,.
__________________
love to fish
Reply With Quote
  #10  
Unread 06-16-2023, 09:16 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

Carb girl?

Must be a northern thang
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:19 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.