|
|
|
|
#1
|
||||
|
||||
Short vs long shaft
I just got a '75 V-20 Fisherman CC that I'm restoring and would love some advice. The boat came with a 235 Johnson long shaft mounted on a jacking plate but the plate is cracked. I have a short shaft here that I could put on or replace the jack plate...what would y'all recommend? I'd rather drop the motor down for easier fishing for my son but if the boat rides significantly better with the plate/long shaft, then I'll get another plate. Any ideas or comments would be much appreciated. FYI: the boat will mainly be used for fishing in the Gulf of Mexico off the Mississippi Coast within 10 miles of shore but will also be used in much deeper water 20-or-so miles out sometimes.
Thanks all, Kenny
__________________
1975 Wellcraft V-20 Fisherman O/B center console (Step-Lift hull) with 1983 Johnson 235hp motor I'm refurbishing and I'm looking for parts like bow rail, bimini top (with attaching camper top) and advice/info; feel free to contact me with any of that. Thanks, Kenny 
|
|
#2
09-25-2011, 09:49 PM
|
||||
|
||||
|
I'd do two things...stay w/the 25"er and replace the bracket...or fix the one you have now... it might be a weldable repair...the common experience around here has shown a motor on a bracket likes to "BURY" itself in the wake when coming off plane...a 20" motor's power head is closer to the water and makes this situation worse...the 25" tends to stay higher and dryer...assuming you have an open, notched transom like my '74 had, I would close in that opening w/Starboard or something prior to going offshore...that of course assumes also your bracket holds the OB off enough to clear closing it up...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#3
09-26-2011, 09:16 AM
|
||||
|
||||
Does he have a bracket? Sounds like he just has a jack plate mounted on a regular transom. Kdubuissonb, some pics would be a good idea so we can see what you're faced with.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#4
09-26-2011, 10:01 AM
|
||||
|
||||
|
Quote:
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#5
09-27-2011, 04:01 PM
|
|||
|
|||
|
Just for fun.....
Short shaft = 15" Long shaft = 20" X-Long = 25" XX-Long =30"
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
 |
|
|
Hybrid Mode
