|
|
#2
06-29-2010, 05:01 PM
|
||||
|
||||
yes cap and seal it good
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's 
|
|
#3
06-29-2010, 06:20 PM
|
|||
|
|||
|
Isn't it possible to just fiberglass over and leave the cap off? It seems to look a lot cleaner when done this way.
__________________
84' Wellcraft Fisherman 18 / 96' Evinrude 130-Sold 20' Fisherman project underway www.ParkerFenceandDeck.com
|
|
#4
06-29-2010, 07:19 PM
|
||||
|
||||
|
The cap is a protector. If the transom glass should develop a crack from the bouncing and flexing it gets the cap still keeps the water out, and it serves as a protector to a limited degree for things being dropped on the top of the transom.. Plus a clean topcap looks nice also... Since things cost money, and lots of things cost lots of money, I've found that if a manufacturer spends money to install something there's usually a reason for it.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. Last edited by Destroyer; 06-30-2010 at 10:54 AM.
|
|
#5
06-29-2010, 07:33 PM
|
||||
|
||||
|
Yeah Curapa I put three layers of glass and plenty of resin on the top of transom already, I was thinking the same as you but it does make sense what destroyer is saying. I just don't know where to get it made so it will fit my thickness?
|
|
#6
06-29-2010, 09:40 PM
|
||||
|
||||
|
Look around online or in your phone book for a local sheetmetal shop. Pay them a visit in person late in the day when everyone is in a good mood with your dimensions...they'll probably bend you one up while you wait and charge you maybe $20 bucks...Not sure where you are located but if you are in NJ send me a pm and I can get you something.
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#7
06-29-2010, 10:17 PM
|
|||
|
|||
|
You can also use vinyl siding corner piece. When i did mine, i wrapped it with glass and paint it different color so looks like a cap but fully waterproof.
__________________
GIORGOS/TAKE A KID FISHING 1981 FORMULA F-233 UNDER COMPLETE RESTORATION. 2008 GRADY 336 T/350'S
|
|
#8
06-29-2010, 10:35 PM
|
||||
|
||||
|
Yeah when i said needs cap that means you need something on top to seal it up. i usually use 4 layers of glass over all mine.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#9
06-30-2010, 06:15 AM
|
|||
|
|||
|
Quote:
__________________
Roger '84 V20 with 2000 150 HP Yamaha 2 stroke
|
|
#10
06-30-2010, 01:09 PM
|
||||
|
||||
|
I glassed mine completly on the 18 and LOVE it. I highly reccomend it for a one time fix and clean look.
__________________
Really, who ISNT better looking than Charlie?
|
 |
|
|
Linear Mode
