![]() |
|
#1
|
||||
|
||||
|
Well , I got caught with my pants down, figuratively speaking. Unlike Steplift who is obviously more organized than I my V20 got caught in a snow storm with another coming tonight. Due to work and other commitments I never got out and fished Raritan Bay like I planned and now I have not winterized the motor. Can I run the motor ( Evinrude ) long enough without a hose hook up to inject the fogging oil in the system or should I wait for the next thaw and open up the pipes and run a hose. Its a bit from the house. Any ideas appreciated
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#2
|
||||
|
||||
|
No you can not run the motor for 1 second without water!!!!!!!!!!!!!!!!!!!!!!!!!!
It can wait for a above freezing day no problem. I hasve even gone and removed the spark plugs filled with mystery oil and then just tyurned the motor over with out starting befpre. Foging the motor has nothing to do with the cold!! It is just to oil thre internal motor parts so they don't rust up from sitting around for a long period. Also don't forget the lower unit! That will be junk if you wait till spring and it got water in it over the summer. So no worry!! You have time! ;)
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#3
|
||||
|
||||
|
MJ my Rude has an injector set up to spray direct from the can into the carbs, can I do this without letting the engine start and will that circulate it thru if I just keep turning it over or does it have to be actually running, and thanks for the reminder but I know about the lower unit.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#4
|
||||
|
||||
|
get a bottle of Mystery Oil and squrit it inn there, if you want to do it now.
But like I said you have time to wait if you want to. I never use fogging oil, I just use Mystery Oil in a squrit bottle all the time.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#5
|
||||
|
||||
|
OK MJ
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#6
|
||||
|
||||
|
hey Willy i personally don't fog mine every year it's not going to hurt it to not be fogged. OMC is one of the few outboards that will fully drain when in the down position. You can run it on a hose one warmer day early and it will drain all out by night. But as MJ said DO NOT run without water. Yamaha's are the only other outboard that will fully drain the water cavities. Others better either blow air threw or run antifreeze in them.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#7
|
||||
|
||||
|
Willy, motor HAS to be runnin' for spray to get into cylinders where it does any good...even w/the nozzle you're talkin' about on the side of the carbs...but no need for concern; a few freezin' nights won't hurt anything...
Skools...how are Honda 150s at drainin'?...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#8
|
||||
|
||||
|
they drain fair but hold water in the bottom of the block in 2 cavities, shouldn't hurt as long as it is left down. Where you are it shouldn't hurt anything. Up north it might. Hope everyone has cleaned out there holding tanks for bait. The live well and bilge lines need to be blown out too.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's |
|
#9
|
||||
|
||||
|
Thanks, Skools...hope we don't have a Norton-Freezin' winter... :D...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#10
|
||||
|
||||
|
If you remove plugs and spray Marvel or fogging oil into cylinders and turn engine over w/o starting does that help or not.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
![]() |
| Thread Tools | |
| Display Modes | |
|
|