|
|
|
|
#1
|
||||
|
||||
Prop question???
Interested in hearing some opinions, got a 13 3/8 X 17 stainless on my 19 ' skiff with a 90 hp ETEC. Wants to porpoise above 4200 rpms trimmed all the way down, plus I think the max rpms I've gotten is 5100 or so, too low below the max which is like 5500-5800 i think. I want to switch to a 4 blade stainless for stern lift and hopefully stop the porpoising, plus drop down in pitch to get the rpms up.
Thinking about a BRP Rogue, Solas HR4 Titan, or Solas HR4 Rubex, in either a 13 1/2 X 13, or 13 1/4 X 15, what y'all think? Plus if someone has one like what I'm looking for kicking around in good condition I'd be interested.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 Last edited by bradford; 06-09-2016 at 11:38 AM. 
|
|
#2
06-09-2016, 11:34 AM
|
||||
|
||||
You may need to shim the motor.
My father had that problem with his 16V Ashcraft when he had the 90 horse on it. West Marine. http://www.westmarine.com/buy/t-h-ma...rctxoC47Dw_wcB Here is a set on ebay. http://www.ebay.com/itm/like/2719362...&ul_noapp=true
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny
|
|
#3
06-09-2016, 11:41 AM
|
||||
|
||||
|
Those have crossed my mind, I'm running a TH Marine Atlas jack plate as well, and dont know if having too many "links in the chain" so to speak would be a bad thing?
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
|
#5
06-09-2016, 11:56 AM
|
||||
|
||||
Quote:
 Thats me on the right.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
