|
|
#1
|
|||
|
|||
Rod and Tackle Storage Solutions
This box will replace the back to back seats. I'll put a cushion for a 134qt cooler on top and a couple of rod holders on the side. The top is removeable so I don't lose any space behind the tackle drawers. I'll stick things behind there that I won't use regularly.
  <img src="http://www.forumpictureprocessor.com.../v20%20005.jpg"> The link is a pic of the rodholders on the splashwell divider. I added about 7" of starboard to the existing piece. Don't know why it posted differently than the others. Last edited by 2ndCurse; 05-21-2008 at 04:24 PM. 
|
|
#2
05-21-2008, 05:34 PM
|
||||
|
||||
??
 This box will replace the back to back seats. I'll put a cushion for a 134qt cooler on top and a couple of rod holders on the side. The top is removeable so I don't lose any space behind the tackle drawers. I'll stick things behind there that I won't use regularly. So the door openings to the cabinets will be toward the center of the boat?
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny Last edited by tsubaki; 05-21-2008 at 05:47 PM.
|
|
#3
05-21-2008, 08:53 PM
|
|||
|
|||
|
Yes, drawers will open in, towards the center of the boat. Just finished glueing and screwing. Box was just fitted together for pics. I'll sand and prep for finishing w/ screws in place. Once it's finished, I'll remove screws and bolt it together. The only ? I still have is what to use to keep the wood off the deck. Some type of bumper. The seat is mounted tight to the deck and holds water. I want to avoid that. I'm a few days away from installation anyway so I've got time to think on it.
|
 |
|
|
Linear Mode
