Anchor Roller / Pulpit

[cliffpaul2]

I just finished (with lots of help from a friend at work) mounting an anchor roller to my bow. *I used a thick piece of aluminum (scrap from work) for the mounting bracket and polished it so it looks great. *I found a big cleat at the recycle yard for $5. *The bolts go all the way through and I used a nice piece of stainless steel for a backing plate. *The roller wheel sticks out about 6 inches from the bow so that the anchor stays clear of the gelcoat. I tested it today and it works great too! *No more climbing onto the bow to drop or pull the anchor and it makes it much easier to pull the line! *