|
|
#1
|
|||
|
|||
Looking for Hatch Liners
I have a 1988 Wellcraft V20 for about 20 yrs. Got orphaned when Evinrude sunk. Will be repowering. In the mean time planning to start with little things to start. Stern hatch liners rotted long ago from some accidental sun exposure. Never thought it would be so hard to find. Thought the original mfg was Tempress, but they have nothing even close size wise. Call to Wellcraft was worthless. "we dont keep records back that far" but it appears I can have the make a hatch cover which I have done twice in the past. Anyone have any thoughts where I can find a pair of hatch liners approximately 8.5 by 13 inches. I can probably shrink or stretch that measurement a bit. Has to have a lip on it to catch the opening. The original was tapered about 10 or 12 inches deep. Have found lots of interesting info on this site over the years.
|
|
#2
09-07-2020, 08:07 AM
|
||||
|
||||
Ahh, one of the Holy Grails in the Wellcraft kingdom. Somebody on here reported a certain bathroom waste basket from Rubbermaid was a close fit. Also had a member that was going to use one as a mold and make some fiberglass replacements, might find him in a search.
Good Luck and if you find a good substitute or a source, post it.
|
|
#3
09-07-2020, 07:44 PM
|
||||
|
||||
|
I still have one that’s in pretty rough shape. Lots of cracks and it seems like every time I pick it up it breaks more. I need to use it to make a mold for some new ones, just haven’t got around to it. May be a nice winter project.
__________________
Current boat(s): 1985 V-20 Cuddy/ 470 IB/OB 1972 Egg Harbor 38’ Sedan/ 454 Crusaders
|
|
#4
09-08-2020, 12:15 PM
|
|||
|
|||
|
Searching for the Holy Grail - hatch liners
Thanks for those replies. I've got one damaged liner that I suppose I could make a mold for however it appears to be some kind of vinyl. Thought I had a winner in a stainless lunch counter serving insert but it was off by about an inch and tough to sand or grind stainless to the right size. Going to do a bit more searching on the Rubbermaid idea. In the meantime..... the search continues. Thanks.
|
|
#5
10-06-2020, 08:16 PM
|
||||
|
||||
|
There's nothing that says it has to be plastic. You could probably go to local sheet metal shop and have them make you some out of aluminum....might not be cheap but would work fine.
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#6
10-08-2020, 11:46 AM
|
||||
|
||||
|
Speaking of metal, did nt someone post about the stainless drop in bins they use on buffet tables working? They have shallow ones and deep ones. Had to do a little trimming on the flanges
Got them at a surplus restaurant supply house, I don t know, maybe I dreamed it
|
|
#7
10-14-2020, 01:17 AM
|
||||
|
||||
|
Quote:
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
 |
| Tags |
| hatch, liners, v20, wellcraft |
|
|
Linear Mode
