Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #1  
Unread 10-31-2011, 06:52 PM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default 81 V-20 CC ..... The Free Boat story

Hey folks.... I've been looking at this welly cc on craigslist for weeks and telling everyone I could about it but nobody was biting....The fellow was selling his trailer and giving away the boat. Well I'd held off as long as I could and I couldn't stand it any more so I sent off an email... A few days later I borrowed a trailer from a friend and brought her home. He had replaced the stringers and the deck 5 years ago (did an excellent job btw) and discovered that his engine was toast.... He brought it from ME to IN and it has a faint outline of FL numbers on it so it's traveled a bit.

She is missing lots of hardware, the tackle center, back panel of the console, and the bilge access panel along and a few other odds n ends. She has no wiring or instruments whatsoever when but does have the cc and a windshield along with all the hatches...

In the same week I found an 80's 16' viking with MAJOR rot on a trailer with a 75 merc 115 tower o power and a CMC tilt n trim unit... Bought the whole rig for $70!

Had not run in many years and the spark plugs were out for years! YIKES... engine wasn't seized tho so I sprayed some penetrating oil in the cylinders and put the old crusty plugs in. I cranked it over for a minute (15 seconds at a time) and pulled the plugs to do a compression test... ranged from 135-156... not stellar but fair and I suspect that it'll even out and improve a bit with some run time..... So a few hours later I had her running on the old nasty gas that came in it! Shut it down replaced the impeller and mixed up a gallon of fresh gas.... I've run it on the hose for close to an hour now and she fires right up and purrs like a kitten. Someone butchered the transom clamp brackets on the engine tho so I need to find some good ones to swap in later... I now have the CMC and the engine hanging on the V20 and have the cables rigged but I need to find top mount controls.... gave a real nice set away a year ago... dangit

Sooo with fuel figured in I now have about $200 in it and will be selling the trailer from the viking soon.... Anything over $200 puts me at a negative cost!

I'm not expecting any speed records with the 115 but I think she'll do well enough for use here on the ohio river


I have a couple gazillion posts on iboats.com with the same username but the fellow who gave me the cc told me about this site so here I am.... gobs of good info here btw
jjj 002.jpg
jjj 001.jpg
jjj.jpg

Last edited by smokeonthewater; 11-17-2011 at 01:02 AM.
Reply With Quote
  #2  
Unread 10-31-2011, 07:55 PM
reelapeelin's Avatar
reelapeelin reelapeelin is offline
God
 
Join Date: Aug 2003
Location: Spartanburg, SC
Posts: 15,610
Default

From your description of getting that Merc started...when I die, I'm gonna come see you cuz you can RESTART ANYTHING!!...yer new CC looks pretty good!!...keep us posted on how she do and thanks for the pictures...
__________________
'74 V-20/ BF 150
'95 V-21/ BF 150
'84 V-20/ 200 2.4 Merc
'87 V-20/'18 F150 Yamaha



http://www.wellcraftv20.com/gallery/albums/MJ-hide/Iphone201205.jpg
Reply With Quote
  #3  
Unread 10-31-2011, 08:21 PM
RWilson2526's Avatar
RWilson2526 RWilson2526 is offline
God
 
Join Date: Jul 2008
Location: Morris County, NJ
Posts: 2,330
Send a message via AIM to RWilson2526
Default

Fantastic find I'd say....boat looks pretty darn good sitting on the trailer from what I can see. I recognize your screen name from Iboats......I think you do have something like a gazillion posts. Welcome to the madness. Cant wait to see some more pics
__________________
1986 V-20
1986 Yamaha 150 HP
Reply With Quote
  #4  
Unread 10-31-2011, 08:30 PM
Kracker Jack's Avatar
Kracker Jack Kracker Jack is offline
God
 
Join Date: Aug 2011
Location: va beach
Posts: 1,753
Default

cool boat by the way.Im not an outboard mechanic but if your lower compression on a cylinder is 135 psi and the top end compression is 156 psi then your not with in 10% so thats not good for the motor.
Reply With Quote
  #5  
Unread 10-31-2011, 10:44 PM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

Quote:
Originally Posted by Kracker Jack View Post
cool boat by the way.Im not an outboard mechanic but if your lower compression on a cylinder is 135 psi and the top end compression is 156 psi then your not with in 10% so thats not good for the motor.
nope not ideal but it's not uncommon for an engine that has set for an extended period to get better with some run time..... I haven't rechecked yet but it has gone from missing and shaking to running very smooth so I suspect that it's already improved.... I just made a deal with a guy for another 115 tonight... a 79 power trim model so I now have more options.... guess I'll be selling the CMC after all.
Reply With Quote
  #6  
Unread 10-31-2011, 10:46 PM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

BTW thanks for the welcome guys
Reply With Quote
  #7  
Unread 10-31-2011, 11:32 PM
nipper nipper is offline
God
 
Join Date: Aug 2006
Location: Indianapolis, IN
Posts: 1,681
Default

Great find there Smoke. Love the old tower of power Mercs. Boat looks great. Where you gonna be boating on the Ohio River. I generally take a couple runs in the fall season between Lawrenceburg, IN and Cincinnati, OH or Madison, IN area.
Reply With Quote
  #8  
Unread 11-01-2011, 12:17 AM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

thanks... I'm about 12 miles up river from louisville ky... I haven't traveled more than 12 mi up or down river because my other boat EATS gas.... will be nice to be able to sight see a little
Reply With Quote
  #9  
Unread 11-01-2011, 06:39 AM
RidgeRunner's Avatar
RidgeRunner RidgeRunner is offline
God
 
Join Date: Aug 2009
Location: Lakeland, Fl
Posts: 2,526
Default

You are not gonna have any money in that rig at all. LOL Making the rest of us look like we been duped something fierce. Nice score indeed. Your boat looks real nice. I have a few miscellaneous items in the shed. Deck plates, battery trays, maybe a gauge or two. I think the handrail will fit after seeing the pictures. Bust Out Another Ten. instead of Thousand. That is refreshing, Way to go. I'm thinking twin towers o power...
__________________

1996 -19' NV Flats 115 Mercury 4-stroke
1983 -20' Wellcraft Center Console 250 XS
Reply With Quote
  #10  
Unread 11-01-2011, 09:10 AM
smokeonthewater's Avatar
smokeonthewater smokeonthewater is offline
God
 
Join Date: Oct 2011
Location: Indiana near louisville Ky
Posts: 1,814
Default

awesome, thanks..... yeah I'm poor but stubborn and creative so I just keep plugging along till it's done lol

my last project took two years of scrounging craigslist to complete but this one looks to be coming together much faster...

twin 115's are tempting as heck but I'd probably need to find another parts motor for that so I'll stick with a single for now and see how it works out. I keep reading on here that these hulls really don't want to go fast anyhow. although I DID read the 12 page "hitting 60" thread... nice!
then there's my big reason for picking this one up.... Fuel economy..... I HOPING that this single 115 will perform decently and do much better on fuel than the 1mpg I'm used too.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:29 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.