have a fixer upper need help

[mike77v20]

i recently acquired a 77 v20. the motor is out and the stern drive is of beings i had a stern drive before thats easy for me it the motor that has me stumped and ot looks like the rear spot for the bottom of the bell housing to bolt to up to is missing if any one has a similar boat or knows where where a picture of the motor mouted up is that would help me out to get this project started

[mike77v20]

if pics would help let me know

[Hedge]

pictures always help

[Road King Cole]

Assuming an Alpha 1...

There should be a housing assembly there that would have 4? bolt holes which the motor would mount to.

You also may want to get a shop manual for your motor and outdrive...I could never survive without one...

rkc

[mike77v20]

if i did it right theres a pic of where the motor goes there should be a spot for two bolts to mount to floor but it looks like theres something missing i see the two for the front and the two on the transome and where can i get a manual at been to a few places around here and they couldnt help me

[mike77v20]

wrong pic thats the carb let me try again ok got it this time pics are so small

[spareparts]

I've read the initial post four or five times, and have looked at your pic, I still don't understand what you're talking about

[mike77v20]

There are four bolt holes on my motor two in front motor mount two in bottom of bellhousing two that go to transom that are in top of bellhousing I see no where to mount the ones in the bottom rear

[mike77v20]

Should have said six bolt holes

[mike77v20]

Never mind prob gonna get rid of it guy wants 1200 to put in missing beam or whatever he called it to where thebottom rear of motor mounts to has a straight six never ran and rebuilt out drive yall tell me y'all are the experts