|
|
#1
|
||||
|
||||
Closed Up The Transom Top
Something I've been wanting to do for long time...remove the aluminum cap from the transom top and smooth it over...
Before...   Take a look at the two Clamshells just above the waterline here...the PO drilled these two holes thru the transom, ran several transducer lines thru them on both sides, left them open, no caulking or anything and put these clamshells over them like they would somehow keep water out...not too good...  Crammed a BUNCH of structural filler in and under the gap in the cap...and then came back over it w/surface filler...   After  And then went to sanding...got all the screw holes, transducer holes, etc while at it...  After paint, it'll look a little cleaner still...the HEAT finally broke down here and looks like things can move along now...  As you can see, plenty more to do...have the primer and paint ready for tomorrow and will paint transom only for now....gotta get it ready to hang motor soon and then will finish up remaining hull work...but the aluminum cap is in the Sptbg Co DUMP by now... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
Last edited by reelapeelin; 08-16-2011 at 02:37 PM. 
|
|
#2
08-16-2011, 02:43 PM
|
||||
|
||||
|
That is one Ugly Mother before. Great job closing the gap. You glassing it up or letting the paint do the sealing?
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
|
#3
08-16-2011, 02:44 PM
|
||||
|
||||
|
Looks good.
 Are you going to put that swim platform with the single bracket back on?and did you ever think those open clamshells were to let the water out? rkc
__________________
Sorry to say that I no longer have a 1984 V20 :(
|
|
#4
08-16-2011, 03:23 PM
|
||||
|
||||
|
Looks great. When i had my outboard off the other day i pulled my cap off. It wasn't as bad as yours, but it still wasn't pretty. Is that a 25" transom? Is that factory, or is it something someone did? On my 83 V20 i can only see the top bolts for the outboard not all four.
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#5
08-16-2011, 03:45 PM
|
||||
|
||||
|
Looking good there brother!!!!!!!
Thats is my plan over the winter to have mine done...
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#7
08-16-2011, 06:21 PM
|
||||
|
||||
|
Quote:
Thats nice work Reel, keep the updates coming...you are inspiring me for my winter projects! Hedge, that would be a Mako....I was a Mako man before a V man!
__________________
'78 V20 Center console "Sea Deez Nuts" 200 Merc Gloucester Pt, Va
|
|
#8
08-16-2011, 07:34 PM
|
||||
|
||||
|
Quote:
Jason it's a 25"...they musta changed 'em up a might between years.. RKC...that swim platform is now in Ridge's good hands...it might wind up on my old 74 which he has at present...I put that 74 together in 1999 and been wantin' a rolled transom top since...seein' Pete's put me over THE TOP 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
|
#9
08-16-2011, 07:38 PM
|
||||
|
||||
|
Lookin good....might as well do all that stuff now that you have the chance.....great pics as always ....but please stop posting that paint speckled self portrait...i'm gettin' nightmares.
__________________
1986 V-20 1986 Yamaha 150 HP
|
|
#10
08-17-2011, 09:35 AM
|
||||
|
||||
|
Quote:
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha
|
 |
|
|
Linear Mode
