Rod Holder Drains

reelapeelin · #1 04-14-2010, 07:43 PM

http://www.thehulltruth.com/boating-...ml#post2913074

chumbucket · #2 04-14-2010, 10:19 PM

Not bad for someone as old as you.....

Willy's been telling us you're loosing your mind and senility is setting in. I said, I'll bet that old coot still has one or two good ideas left before we send you off to the home.

Nice work my friend.

reelapeelin · #3 04-15-2010, 05:23 AM

Quote:

Originally Posted by chumbucket

Not bad for someone as old as you.....

Willy's been telling us you're loosing your mind and senility is setting in. I said, I'll bet that old coot still has one or two good ideas left before we send you off to the home.

Nice work my friend.

Thanks for the vote of confidence, CB...problem is sometimes I fear Willy's RIGHT...which way is that home you're talkin' about?...

tsubaki · #4 04-15-2010, 05:59 AM

reel, see if they got a double occupancy available, if you would.

http://www.wellcraftv20.com/communit...=specs&page=19
Mounted the water separator and battery switch to the stern lift eyes bolts beneath the rod holders. But got concerned about water dripping on them so I attached a sleeve of discharge hose to the rod holder to make the water go past them

reelapeelin · #5 04-15-2010, 06:27 AM

tsubaki...I'll check on it for you!!...LOL!!...like the sleeve!!...that'd work on my rear holders...where'd you get that stuff??...

Cam · #6 04-15-2010, 07:09 AM

Looks like a standard pool drain hose available at any pool supply store. Great idea. Mind if I steal it for my boat?

willy · #7 04-15-2010, 07:24 AM

Aren't you clever, good job. Let me know where you and Tsubaki and CB are going to be homed up.
I will come and visit you guys once in awhile, it will give me somewhere to go also when I get your ages!

Blue_Runner · #8 04-15-2010, 08:51 AM

Genius. I've been pondering the same thing for all this time. It seems I now should take the leap. Why they did not address this issue from the factory is beyond me. So let me ask - where will the discharge be located? I thought about putting a thru hull on the lowever part of the rod box just under the forward holders for simplicity sake. However it would make it harder to remove the rod box - which I do from time to time to gain access to wiring and cables.

So what are you thinking?

reelapeelin · #9 04-15-2010, 11:51 AM

Quote:

Originally Posted by Blue_Runner

Genius. I've been pondering the same thing for all this time. It seems I now should take the leap. Why they did not address this issue from the factory is beyond me. So let me ask - where will the discharge be located? I thought about putting a thru hull on the lowever part of the rod box just under the forward holders for simplicity sake. However it would make it harder to remove the rod box - which I do from time to time to gain access to wiring and cables.

So what are you thinking?

BR, I gonna run mine back to the bilge...it really shouldn't be LOTS of water and whatever gets back there won't hurt anything...those bearing cups are $2.29/pr at Wally Market and the plastic thru-hulls came from Bass Pro for about the same for each...that flexible white bilge hose is cheap as crap and I bet you got some hose clamps already...

Blue_Runner · #10 04-15-2010, 01:20 PM

10-4, bilge it is then....much better than foam