Help West Resin will not kick..

nymack66 · #1 08-25-2009, 08:39 PM

I brought a Gallon of resin from West Marine it will not harden period whats wrong ? I mix a quart with 9 cc of hardener as instructed.
Never did the Resin brought from defunct Boater World failed me as a matter of fact it will always tend to kick early I miss that store .Not to mentioned I paid 1o bucks more per gallon ..
My only option is to wipe it clean with acetone and start over ?

See product in q
http://www.westmarine.com/webapp/wcs...3&classNum=673

spareparts · #2 08-25-2009, 08:45 PM

change hardener, had a batch go bad on me once, I thought the resin was bad, went adn bought new resin, same thing, before I went back to the store, I tried a different tube of hardener, it ste off, tried it with the old resin, worked fine, luckily I hadn't found any where to get rid of the old resin

RidgeRunner · #3 08-26-2009, 07:11 AM

I went thru a lot of resin on my rebuild. The ambient temperature and humidity reaks havoc with kick times. Unfortunately, the hardener does go bad. I used to keep the MEKP in the fridge. Mini-Craft of Florida is a good supplier. Let me know if you need something. Vic

Stillrunning · #4 08-26-2009, 09:18 AM

Lowes in my are sells Elmer's resin which works very well for I think $19.00 a gallon.

nymack66 · #5 08-26-2009, 12:18 PM

Quote:

Originally Posted by Stillrunning

Lowes in my are sells Elmer's resin which works very well for I think $19.00 a gallon.

Are you sure ? The Lowes here sells a quart for 14:99 ..
It was a simple backing plate for my anchor platform I was making out of plywood laminated in resin , I will wipe the piece off and try with new hardener, I did use an old batch ..My fault I guess, thanks guy's

phatdaddy · #6 08-26-2009, 04:32 PM

are you referring to polyester resin and not west system epoxy? if it is poly resin, i would suspect the MEK.

cfelton · #7 08-26-2009, 05:03 PM

Never had that problem. I bought all my poly resin from Carolina Classic boat builders. They sold me 3 gallons and the MEK for $15.00. Great folks! It kicked like crazy!

nymack66 · #8 08-26-2009, 08:01 PM

Thanks guys its got to be MEK, I am ashamed at myself to have this happen to me since I worked with over 4 gal of this stuff last summer..
I will test a small batch this weekend , I was glassing a peice of ply wood 2" x 14" to use as support/reinforcement for my anchor platform to be placed inside the cuddy under the deck I will post pictures once completed

bigshrimpin · #9 08-28-2009, 09:35 AM

Quote:

Originally Posted by nymack66

Thanks guys its got to be MEK, I am ashamed at myself to have this happen to me since I worked with over 4 gal of this stuff last summer..
I will test a small batch this weekend , I was glassing a peice of ply wood 2" x 14" to use as support/reinforcement for my anchor platform to be placed inside the cuddy under the deck I will post pictures once completed

Don't feel badly . . . I left a whole pail 5 gallons of resin outside. The cap wasn't on tight and water leaked in . . . Now I have a bucket of resin that won't cure :( There goes $120 out the window.