![]() |
|
#1
|
||||
|
||||
|
Hi everyone. I just joined the site because I have decided to purchase a V20. I am in the process of looking at several, but I am a total babe in the woods when it comes to buying a used boat. Can I get a tip or two from you folks on what to look for so I don't buy a bad boat ? I would like to know how to how to check the transom and important structural things, plus anything else you think would be helpful. Thanks a bunch.
|
|
#2
|
|||
|
|||
|
The fellers on here always say to check the transom by standing on the motor and bouncing a bit to see if you get any flexing or popping sounds.
|
|
#3
|
||||
|
||||
|
I hope my 300 pound butt doesn't take the back of the boat off. hehe
|
|
#4
|
||||
|
||||
|
If it does then it was bad. Just remember that most outboards big enough to push a V weigh in around 400 pounds, and they put at least that much pressure on the transom when they are under power. Also walk on the deck all over and pay close attention to the floor around the hinges in the floor hatches for flexing.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#5
|
||||
|
||||
|
Rather than standing on the motor, I'd say tilt it up and apply your weight to the foot a little at the time until you got it all on there...listening for a snap-crackle-pop which is a dead giveaway for a bad transom...if you hear very little or nothing at all, you gotta good one...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#6
|
||||
|
||||
|
I took your advice, I really appreciate all the help. I bought the boat. Everything seems to be ok. I think I got a great deal. I paid 1500 for it 1984 v20 steplift with a great running 150 Mariner on it. It needs some love, that's for sure, but it came with a great trailer, all the safety gear, an extra external gas tank already set up for emergencies, radios, fishfinder, battery tender,and 2 new deep cycles, plus a whole bunch of other stuff. lol ..... I could probably part the engine out for what I have in it. I am very happy. Time to get to work! Any advice you guys can give me as a new owner would be much appreciated. Thanks
|
|
#7
|
||||
|
||||
|
Sounds like a GREAT deal.......we need pics....welcome to the site.
__________________
1986 V-20 1986 Yamaha 150 HP |
|
#8
|
||||
|
||||
|
We need pictures and congratulations too................
__________________
1974 Wellcraft V-20 Center Console 1999 Mercury 150 HP Bluewater 1975 Wellcraft V-17 1977 Evinrude 70 HP Restoration Thread http://forums.iboats.com/showthread.php?t=404584 Enfield Connecticut Civil War Veterans Graves and History Pages http://enfieldwargraves.smugmug.com My companion book I authored http://www.blurb.com/books/1137672 |
|
#9
|
|||
|
|||
|
Quote"Any advice you guys can give me as a new owner would be much appreciated. Thanks"
Just keep the wallet out of your pocket, cash in one hand with a credit card in the other. $$$$$$$$$$$$$$$$$$$$ Welcome to the site, I as well as every other member love these boats. You can get a lot of great ideas and help here.
|
|
#10
|
||||
|
||||
|
Sounds like ya STOLE it fo sho!!...pictures when ya can...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
![]() |
|
|