|
|
#1
|
|||
|
|||
New Dash
I want to give props to csvencer, as I used his dash panel as a rough template for mine.
The panel is 1/4 starboard. I didn't flush mount the GPS so it is easier to remove for security reasons. If you guys have problems seeing the pics I'll try to fix it after work tomorrow http://images.kodakgallery.com/photo...2307_0_ALB.jpg
__________________
2005 Grady White Tournament 225 with a 2011 Yamaha f250 Last edited by dbetterred; 07-30-2008 at 03:33 AM. 
|
|
#2
07-29-2008, 09:06 PM
|
||||
|
||||
|
Other then being a bit white, and hard on your eyes in the sun, Its a great job!!
I need a new switching panel for my boat also, and I am looking for one like you guys have. But I have found with most that the fuses is what gets messed up. I am looking for one that is just swithes and I will put a fuse box inside nice and dry.
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#3
07-30-2008, 03:45 AM
|
|||
|
|||
|
The switch panel I used is also a Bluesea panel. It has a high quality gasket 'shield' that covers the whole fuse area under the white plastic cover that you see. The gasket is thick and has three sealing ridges and looks to me that water wouldn't be an issue (fingers crossed). I chose white just cause I like the looks of it, if it is sunny out I always have sunglasses on so the glare is not an issue.
__________________
2005 Grady White Tournament 225 with a 2011 Yamaha f250
|
|
#4
07-30-2008, 01:26 PM
|
|||
|
|||
Nice work!
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
|
#5
07-30-2008, 03:43 PM
|
||||
|
||||
|
I have posted this elsewhere but I am working on getting some new panels for my v20 and I found a guy named scott over on classicmako.com that does some awesome work....and at good prices. He is really great with ideas also so if you are interested I would check out his work and shoot him an email. You can see a lot of his work at classicmako.com or you can check out his website at vectorled.com
__________________
SALTY CRACKERS Brian Stuart Daphne, AL 1989 V20 Dual Console
|
|
#6
07-30-2008, 06:47 PM
|
||||
|
||||
|
Blue Sea panels are the only way to go. You can get some that have push button circuit breakers with rubber boots that seem to hold up fine.
__________________
1975 V-20 w/1996 225 Johnson
|
|
#7
08-06-2008, 09:08 PM
|
||||
|
||||
|
Quote:
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
|
|
Linear Mode
