[Skools_Dual]

epoxy doesn't sand well and will leave a uneven finish when you are done. but you can yes


the wax paper is only so you are basically using the hull and the wax paper as a mold the resin and cloth won't stick to the wax paper that way you can trim the piece you make on the wax paper to fill the hole you have, just trim it after it's cure till it fits tight in the hole and then glass in with cloth and you will have a better bond.


TAPE THE WAX PAPER TO THE HULL AS TIGHT AS YOU CAN SO IT DOESN'T SAG WITH THE WEIGHT OF THE GLASS.


you want a mirror piece of the hull basically to put in the hole as a filler.