[Skools_Dual]

i hate to say it to you but that is not the resin you want for under water patches. that is cheap grade resin and what ever thay call for in hardner double it at least or it may never set up. since it has a slight curve lay some wax paper inside the hull and then lay out some glass in a couple layers then once it sets up pick it up and pill the wax paper off the glass part you made now you need to fit it to where it fits tight in the hole you have and then glass patch it in on both sides around the cut line and once glassed in you need to lay a full layer of glass over both sides of the hole and the insert you made. make sure the inside piece can be much larger than the hole but the out side needs to be at least 4 to 6 inches over the hole size all the way around. does this make since?