Re: dash options
Spare...cut OFF everything ABOVE the bulkhead the dash is mounted to...remove all on TOP, leaving area over helm...
W/ 1/4" and 1/2" Starboard, make a new dash to sit down over gaping hole you'll have once you cut away...make new sides of 1/2'' and face of 1/4" as WIDE as you want(from windshield support over to side glass)...run screws from underneath into new 1/2'' sides where they meet bulkhead... :D ;D ...
__________________
'74 V-20/ BF 150
'95 V-21/ BF 150
'84 V-20/ 200 2.4 Merc
'87 V-20/'18 F150 Yamaha
|