[2ndchance]

Went to visit the V-20 today to check on the progress so far. I brought the camera for all of you picture hounds. So far the deck has been installed and glassed in. He used a 2X4 frame screwed and glued to the stringers to support the deck (a little overkill I thought but it gonna move at all). The 2X4's are epoxied to the transom also. An 8X12 hatch will be installed for bilge access. I opted to make a removable bait station in the center section which explains the cut out area in the center. That is another project in the works. An access hatch will be put into front facade for access to the transom and mechanical areas.ENJOY :) :)