View Single Post
  #5  
Unread 01-05-2007, 02:21 PM
Geekie1's Avatar
Geekie1 Geekie1 is offline
Senior Member
 
Join Date: Jan 2006
Location: Doylestown PA, Cape May Co. NJ
Posts: 193
Default Re: Teak treatment question

Cetol Marine Light will last 4 times longer than any other coating I know of. Looks great too! Regular Cetol Marine is too dark for my taste. I have tried most of the other varnish and urethane products such as Epiphanes, Flagship, Helmsman, etc. etc. and with them you are stripping and re-finishing every other year at best. The reason I have alot of experience with finishes is that I have had cedar strip canoes and kayaks and have experimented alot with re-finishing them. I did use varnishes on them because cedar canoes are clear coated with fiberglass (epoxy) and require epoxy UV protection. Unvarnished epoxy will deteriorate in the UV rays of the sun. Fortunately, cedar canoes and kayaks are not out in the sun for 7 or 8 months of the year like boats are so varnishes last alot longer.

I clean teak with a solution of 1/4 chlorine bleach 3/4 water. I have also used a small electric pressure washer (1650 PSI) with good cleaning results. If you use a higher power pressure washer you will probably damage the teak. Let it dry and sand it with an orbital sander and give it about 3 coats of Cetol sanding between coats. Works for me!!!
__________________
Doylestown, PA - Cape May County NJ, and all of the fishin\' holes known and unknown in the Delaware Bay and offshore!!!
Reply With Quote