[Franco]

Pablo, replace the base and the pole at the same time. You'll find that the wires are attached to the base with crimp connectors. Bad Idea in my book. Break out the soldering iron and heat shrink tubing and solder them together. (For you younger guys, soldering irons were what they had before soldering guns, and I have 2 that still work great!) Use the heatshrink with the epoxy coating inside. That'll heep the connections from corroding. Also look for the low glare model, they put out a narrower beam than the regular lights and don't interefere with you eyes as much when running the boat. And don't forget to turn it on when anchored at nite.