Re: My "Free Boat" project
3/4 marine ply is the way to go!
But if all you can get or afford is regular 3/4 then after you cut it all out and have it dry fitted,
take it out, put a good coat of resin minus the hardener and let soak in over night, then add another coat of resin with hardener, this will insure that the resin soaked in and then when you coat with resin & hardener it will seal it all up for ya!
Make sure you do both sides and edges!! Glass in the floor to the edges and all seems you will be good to go for a top coat of choice
__________________
1986 V20 
Old Fishermen never die, we just SMELL that way!!
|