Quote:
|
Originally Posted by Zebra
Ive got all these holes in the gunnels of this boat was thinkin maybe use thin starboard about 3" wide and run a strip down each side. go around the bimini frame
|
Ya know...I kinda like the idea...use 1/2" Starboard, 1/4''
round-over router bit around all edges and screw in from under the gunwale so ya don't show any fasteners...but I wouldn' go around Bimini frame ...take it up and remount on the new Starboard...the only problem I can't get past are the seams(no router here) where it'll butt together...that'll have to be TIGHT to look good...
The ''strips'' will have to be as wide as the widest hardware (rod-holders for instance)
Good luck and keep the pics comin' ;) ...