[chumbucket]

MJ. the bow was left intact and he climbs over it.

Mac, I'd have to ask him if he has any other photos of the roller setup. I can tell you that he removed the dual red/green light and installed separate ones on either side of the boat. The bow roller is through bolted with an aluminum plate backing it up underneath in the rope locker. He rigged something up from a set of bow chocks and a hole in the shank of the Danforth anchor so that when it's pulled up tight in the roller, you push a pin through the hole in the shank. the anchor rode and chain gets dropped down one of those deck pipes with the hinged lid and a PVC tube below to guide the rode and chain into the locker. I doubt that he has any photos of this but I'll ask.