Re: submerged evinrude 175
most likely thay are ok but not sure, but you may need to pull it apart hone lightly and then just use new rings. But you will need to get those holes oiled asap to stop rust. and then try to get it to turn. may need to put a breaker bar on the flywheel nut and get the motor to turn over. I've beaten a Mercury's Crank with a hammer to get loose once, once it can loose the motor ran fine afterwards. goes to show you never know.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|