Great!
Quote:
|
What is the proper way to adjust the control cables.?
|
Till they work!! ;D
really they have a plastic end that is threaded on to a metal rod with a nut, the nut is to keeo it in place after you get it set.
Are you using the same cables?? If so they might be fine were they are.
you want to hear the motor shift into gear and no grind noise once it is in gear!!
If you hear it grinding after you have it in gear adjust one way or the other till itys gone.
Make sure you are going all the way in gear with the shifter!! a slow shift not all the way will not ingage all the way!.
Gas is easier, just look at the linkage and see if it is going all the way, if not the make it longer if it is and not coming all the way back then make it shorter.
Good Luck!@!