Here we go...a few pics
Here is my leader spool holder. I made it out of starboard and a piece of 1/2" pvc. o its not glued on...just slipped in. ;)
I made two of these rod holders for the front. Starboard and pvc. I routed all starboard edges and even the entry to the top of the pvc.
Here is my anchor hawse for the rope to run into the anchor hatch. I havent put the lock on yet...its next.
Here is the roller a buddy and I built. I also put on all new chain, anchor and rope.
Here is my tacklebox inspired by MJ. It was a severe waste of space. It was an open hole that use to be covered by a fabric cover originally, which was of course long gone. It holds four drawers and a bottom starboard drawer with all my heavy weights in it. I even put a push button light in it.
I havent finished putting together my other trays yet so its a little bare. *::)
Here are the new speakers powered by a Pioneer cd player.
I had most of this stuff waiting around for my V20, but since I decided to scrap that project I put it all in the 18 instead. 8)
I even done a few shed improvments. I ran water overhead so I dont have to drag a hose on the sides of the boat for cleanup.
Righook is at the ready at all times too. ;D
I also put in an overhead shelf for my cleaning stuff. Now I dont have to get down at all to clean up the boat. Its at about eyelevel from the deck.
