[Mulv80]

Rebuilding carbs really isnt that difficult as long as you have a factory manual. Buy the factory rebuild kits that come with the float instead of the off brand kits. You will also need a can of decarb. I used Berrymans, they sell it buy the aerosol can or in a large can for dunking parts, I bought the aerosol can. You will also need an air compressor or a can of compressed air for blowing out all the orifices after soaking them in carb cleaner. The hardest part of rebuilding carbs is the float adjustment and the link and synch procedure when the carbs are put back onto the block. In the manual there should be a procedure for the link and synch. Hope this helps.