Here is a reply from one of those paint companies.
Hmm, a rubber paint on a hull ???
Should I or shouldnt I ??
I am filling with West System epoxy and mesh cloth-
For a permanently waterproof, flexible bond:
Prime w/PermaFlex
Patch using the LRB/TAV
Surface coat w/PermaFlex
Can this product be applied to a fiberglass hull-
Yes, 2 coats PermaFlex applied @ 240 sq ft gal per coat
Does the hull need to be dewaxed-
Yes & the fiberglass needs roughened up, see below
Can it be applied by a roller and brush-
yes
Do you see brush marks after it drys-
No, not unless you work too slow
Price for gallon-
The catalog of Sample Packs, products, container sizes, colors w/pricing & on-line order form @ http://www.sanitred.com/productprice$.htm
Fiberglass Application:
1. The first thing you would do is prepare the substrate. Meaning remove any loose crumbly substrate, make sure the substrate is clean, dry, free of any previous applied products, and foreign matter. For best results fiberglass should be sand blasted. This will give the best surface texture for a life-time adhesion and maximum durability. If sandblasting is not applicable, one may try to replicate that surface using coarse sand paper.
2. Prime the substrate with 1 coat of PermaFlex (240 sq ft per gal).
3. Patch and profile any joints, seams, cracks, holes, etc... using LRB/TAV mixture.
4. Topcoat using 1 coat of PermaFlex or PermaFlex-AL (240 sq ft per gal). PermaFlex-AL is our extreme UV resistant outdoor topcoat (above water only). PermaFlex is used as the topcoat below water.
LRB/TAV “Round Bead Consumption Chart”
http://www.sanitred.com/roundchart.htm
Online Order Here:
http://www.sanitred.com/productprice$.htm
Product Price List:
http://www.sanitred.com/pricelist.htm
PermaFlex:
LRB:
LRB/TAV Mixture:
Our website
www.sanitred.com is the location of all product literature, life time warranty, product prices, tech data, references, rate of use charts, etc...
-----Original Message-----
From: Michael Bullard [mailto:
[email protected]]
Sent: Monday, March 27, 2006 8:33 PM
To:
[email protected]
Subject: Sanitred Form Message !!!