Re: Lower Unit Screws
Willy you'll need to run your lower unit after putting that sealant in it. It should run about 10 min or so better off to run it out of the water on muffs so it's not under water. just put it in gear and let it run in gear for about 10 min that will work it in all the seals. You will find some water after so use no matter what all units will. They get hot then you take it out of the water run the motor on muffs to flush and the temp change cause's condensation.
__________________
1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|