[Skools Out]

i had a bad Transom day. I was drilling a hole in the transom to mount something and well the Marina that put the transom in my V20 for the previous owner that never finished the boat. Well the marina used of all things Bondo on the whole thing to make it smooth. Well in some areas it was 3/8 inch thick. Plus they just covered all the holes in the transom with bondo. I would have thought a marina would know bondo holds and absorbs water. So i ground all the bondo out and cut the cap off the transom to find one bad area. So i took a chain saw to the transom and cut out the rot/soft area. So now time to fix. Will post pics asap so you can see the work they did. They did at least put 3/8 inch of glass on both sides of the transom top to bottom.