Quote:
Originally Posted by djdixon1995
Skunkboat, or others using a pivoting roller, how do you secure the anchor so that the pivoting part of the roller assembly doesn***8217;t bounce around? I have the pivoting roller through bolted and back plated directly to the deck with the original bow cleat still in place. No matter how I do it, I can***8217;t get enough down pull on the stem of the anchor to prevent the roller from drooping and bouncing around. I***8217; ve considered drilling through both portions of the roller and pinning it but would prefer not to go that route. Any tips?
|
I used an anchor chain tensioner between roller and cleat.
But I didn't have much problem when it was not being used. Just a little bounce with the chain wrapped on the cleat