Quote:
Originally Posted by scook
The pic's should give you a pretty good idea of what it is. Let me know any questions - it's not very heavy and is all stainless, except for black composite roller.
A caution when drilling through the deck and into the carpet on the roof of the cuddy - it's VERY tough carpet material - I've broken several drill bits getting the carpet fiber wound around the bit.
|
It might be bit too small for my anchor , Here are the dimensions from the Mantus site ... its the 13lb one
https://www.mantusmarine.com/mantus-...-4e9dc02f-2e2e
I think the length is a bit short, but that can be adjusted, the bigger concern I have is the shank might be too big to fit through the loop over the roller.
Mantus has a bow roller for the anchor, but its about $270. These are the dimensions of their bow roller
https://www.mantusmarine.com/wp-cont...SIONS-2020.pdf
I could be wrong and you can possibly confirm for me , but the height on that loop is less than 5" correct? Bases on their specs, it appears that I would need that much space. I will also measure my shank today too to confirm.
** regarding Carpet ** I just removed the entire carpet from the cuddy
It was oily and smelly and I just found that the cuddy was much cleaner with it off. Thanks for that tip though..