Quote:
Originally Posted by Myfathersson
Slow progress this season. Between the impact of the pandemic and a couple medical issues I've gotta devote resources to I don't anticipate getting much done in 2020. I did decide that the engine is not worth attempting to rebuild. The salt infiltration was too excessive. I've spent the last several days dissembling to throw the good bits on eBay and recycle the castings. I finally got the heater core replaced in my truck (started in January but got side burnered due to health) so I can hook up and uncover her this weekend then pull the cap back off to finish up some odds and ends glass work in the hull. If funding can be pulled together I'll get foam to refill the side bays and finish marrying the two halves together. Gas tank will wait till next season. I've got paint on hand to paint the hull and sole so that will be the goal for this season if I can get the foaming accomplished.
|
You might want to consider using pool noodles for foam. You can get them for a buck each at the Dollar store(s). Cut them to the length you need for each void. Nice thing is that you can buy them as you need them as the work progresses and as funds permit. 
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|