Yesterday evening I got the gaps filled and filleting in place on the transom. Went much smoother than I thought it might. I used a few PVC pipe fitting as my forms for the different radii that I was after. I may still add a little more filler at the strakes and chines to help the fabric flow better when I lay it this weekend.
This evening I cut the sheets of 1708 I'll cover the transom with. And in doing so I came to the realization that I ordered the wrong line item...instead of getting 50" wide biax I only ordered the 38" wide. Still works for the transom but is too narrow for how I'm planning to lay the stringers. So instead of the plan to place an order for 18oz roving for the back side of the sole, the sole will now get 1708 and the stringers will be getting 2 layers of 17oz Biax without mat. I'm sure that won't be my last hiccup of this adventure! I didn't get to working out the cuts to match the patterns as my frustration with the mis-order had me too worked up. Better to walk away for a day and come back refreshed and clear.