Quote:
Originally Posted by scook
I think stuff is pretty over-engineered so if I felt like it was solid, I’d probably go with it but I don’t want to be giving you advice that could end up with your new motor on the bottom. Spareparts or Ferm are a lot more technically knowledgeable than I am and have a lot wider experience.
There was a bracket on mine when I got it but a friend took it apart to fix it up and made such a mess of it that I couldn’t figure out how to make it right again, so I saved the stainless bolts and got rid of the rest. A local shop here welds up aluminum box type kicker brackets that make a little sink for hand washing and (for more money) plumb so you can divert the pee stream into the sink and have warm water for cold weather fishing - it’s a really nice feature.
Fishing’s been so lousy here that I haven’t had the boat in the water for a couple of years. I’m hoping for some improvement and trying to get the boat in really top shape,so I can get out in the ocean for some bottom fishing ***127907;.
|
I feel the same way about the over engineering. The bracket functions great and shows no sign of being overly stressed.
Quote:
Originally Posted by Duke01
Hi Dschaffer,
Looks like a nice setup, but depending how she sits in the water you may want to give some consideration to moving the batteries forward. My 9.8 hp kicker weighs 90 lbs, plus the old 200hp Merc weighs 365 lbs. Both are mounted directly on the transom. I have moved my 2 batteries forward to mid-ship in a storage compartment next to the helm on my 78' cuddy. I don't have her in the water yet...maybe in 2 weeks. That will be the test. Prior to this, my splash well drains were 2 inches below the water level.
Does the 15hp Honda have electric tilt?
Hoping to start walleye fishing in couple of weeks..if everything goes well at launch. Right now I am waiting for a main jet carburetor plug that I busted off last week while cleaning the carbs on the old (1980) Merc.
|
My kicker is a 9.9 power thrust. It does have power tilt.
Quote:
Originally Posted by phatdaddy
Is there a backing plate on the inside with the same footprint (or larger)?
|
Not at the moment but it will before it's put into use.