Quote:
Originally Posted by reelapeelin
Destroyer...thanks a ton for posting the pics!!...  ...and conveying what I had in mine for everybody.
The starboard is a bulletproof material for this...easy to work and will hold a screw forever. Long ago I realised the cap was seperating from the hull on my old '74...I installled starboard strips inside the hull, pulled the cap down in place and ran screws thru cap and hull and into the starboard...then ran 4200 all the way around the gap...lotta work but it stopped the water intrusion and was still solid as a rock til I let her go many years later
The couple of places that don't have a cleat have that hard material too...It'll take a grinding wheel on the sidegrinder to get these done
And thanks for the reminder about the rubber isolators between the wood crossmemebers and aluminum tank...I knew there was SOMETHING missing!!
Thanks again Paul...see ya soon!...  |
You're very welcome Oz. Need to get brakes done and oil changed and should be ready to go. Looking forward to meeting you. 
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|