Quote:
Originally Posted by 3 Squids
Update time.
May pick up a gallon of epoxy resin and try injecting the deck this week. I pulled the pieces of wood he had holding the "cooler seat" in place and to my surprise the screws were in dry wood. I thought for sure that's were my soft deck came from but it doesn't appear so. It's weird because other than that there is nothing attached through the deck anywhere near the bad spot. Puzzling.
|
When I redid the underside of my deck because of several soft spots there were no holes in the deck at all. The problem was that the PO never vented the bilge, even during the winter, so any water (and there was a lot of it) that evaporated was just trapped underneath . Eventually the condensation caused the wood on the underside of the deck to just rot out. You might be having a touch of the same situation.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|