Thanks for the feedback. The transom has bare wood in the hole now. But on a good note it's dry wood. Think I'll just get some 5200 and use an acid brush and brush it in the holes for a couple coats then just use LifeCaulk to seal the motor on. I've read horror stories about using 5200 to actually seal the motor on. And as much as I pull motors off that's the last thing I'll need.
__________________
Current boat(s):
1985 V-20 Cuddy/ 470 IB/OB
1972 Egg Harbor 38’ Sedan/ 454 Crusaders
|