You can probably get away with just digging out as far as you can in all directions. Try really hard to sand both skins.
I wanted to be confident in the bond between the core and skins so i removed the inside to get access. The real strength comes from the bond of the "sandwich".
I would probably try making the cut only inside the motorwell. Might not be able to get the piece out though. Maybe just remove the motorwell and one side, if you follow what I'm saying.
Top came from Shore Towers in Brick,NJ many years ago. Top is a 1" hex-core sandwiched between 1/8" glass. Don't think he's doing it anymore. Had him make a repair and add some rod holders a few years back.
Atlantic Towers in Bayville,NJ does nice work.
|