As you can see in the pics, the bulkheads have little to no fiberglass covering the side facing the tank. Due to no coatings, they are rotted enough for me to push my finger through. I removed some of the foam along the sides today and upon closer inspection, most of the wood in the stringers and bulkheads on sides are 75%-90% gone. Most of the joints were not glassed properly. Large gaps that allowed water and moisture into the wood core. Most of the fiberglass tabs are poorly layed out. Some appear to not have enough resin (dried out) or was left with large wrinkles in the glass not sealing core material. I am not happy with the way it all looks. However, it will all be reworked correctly when I replace all the bad material.
|