Quote:
Originally Posted by THEFERMANATOR
This works fine if you have a down looking sonar only. Anything more than a 20 degree cone, and the epoxy method won't work that well. Side looking sonar will not work at all if you epoxy the transducer inside the hull.
|
Question? What about ducers that are in a bath of mineral oil inside the boat? I think I recall someone (Spare maybe) used a piece of 4" PVC pipe, epoxied that to the inside of the hull, mounted the ducer inside the pipe, then filled the whole thing with mineral oil and capped it off. Will that method work with side scan sonar or is it still the same as just epoxying it?
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.
If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God) 
Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|