Ok figured a lot out today. When I got the motor there was already 1 red wire on the solenoid where the 12v supply goes. I added the 12v supply and went on about my business. However turns out there's 2 red wires that go to the solenoid as well as the 12v source. Hooked that up and the tilt/trim works flawlessly.
Still trying to figure out what the green plug goes to.
__________________
Current boat(s):
1985 V-20 Cuddy/ 470 IB/OB
1972 Egg Harbor 38’ Sedan/ 454 Crusaders
|