[Destroyer]

Originally Posted by Blue_Runner

I did remove the pickup and elbow - it is not anti-siphon. There is no screen on the end of the pickup. Pickup is like a piece of fuel line that lays on the bottom of the tank. Notice the pickup is on the front of the tank - it has to lay on the bottom of the tank to reach the back. When I took it out the pickup had a coiled up spring inside of it. I figured the spring was to 1) serve as a screen to block large debris and 2) keep the pickup from collapsing. I took it out but could not get it back in. The pickup seems rigid enough not to collapse and surely could not have collapsed with the spring inside....unless it was collapsing above the spring near the elbow.

Can you buy something like one of those trash pump suction hose strainers that screens out large debris? Something like this: http://www.ebay.com/itm/1-1-2-Steel-...YAAOSwll1Wz0AB Seems to me that even if one side gets blocked with whatever, the rest will still let gas flow. Kinda like the small filters they put on the ends of fuel lines lying inside the tanks in 2 cycle chain saws, weed eaters etc.