[Destroyer]

Originally Posted by Blue_Runner

IF it were the vent then just disconnecting the fuel line from the h2o sep would clear it up, no?

If I cut around the outline I think I'd need to add a lip around the edge to support the "hatch cover" when I put it back, right?

I can cut the deck, get the tank out and clean this piss out of it. I'm just not that up to speed on the glassing/epoxy aspect of putting it back. And I don't want to paint the deck. I like my original deck. :sigh:

I've been living with this for years. My biggest fear is it happening heading out a rough inlet or in between the rock jetties. Not a good situation. I check the ball before heading into those situations and keep a flat head screwdriver handy to disconnect the line for the blowing procedure JIC.

What I need is one of those cameras with a light that the doc runs down your throat to get inside that tank and look around!!!!!!!

p.s. could Tom Brady be hiding in my tank?

Agreed, opening the fuel filler hatch should clear the vacuum if it was in the vent line.

Yes, if you cut the deck you'll have to put some kind of support shelf or brackets along the underside of the deck so that when you lay the hatch back in it will have someplace to sit. I used scrap plywood roughly 4" wide. Used Liquid Nails type construction adhesive to glue it in place, then used several stainless screws to hold it for additional strength. Be sure to seal the wood before you put it in place so it doesn't rot.

Here you go for the camera. http://www.ebay.com/sch/i.html?_from...o+USB&_sacat=0 They aren't really expensive. The one that I bought took less than 2 weeks to arrive from China. Just make sure that your phone will support it. (Must be an Android 4.0 or higher, capable of taking pictures with an detached camera). Will not work with an i-phone. My phone didn't support it, but it also works on a computer display so I just hooked it up to my notebook. Focal length from about 1 inch to infinity. adjustable light sourse built in. I used it to look inside some cylinders of an engine to make sure they weren't melted. Or, if you want to spend some extra bucks, you can get one from Harbor Freight that has it's own built in display. http://www.harborfreight.com/digital...era-61839.html

Lastly, keep a portable tank (3 or 6 gal size) filled with premix onboard with some sta-bil in it. Should last the whole year without spoiling, and if you ever get into one of those dangerous situations where you need to move in a hurry with the ball collapsed, just switch to the portable tank to get you moving quickly.