Quote:
Originally Posted by jjuriga
If I want to tie them into my spare switch on the dashboard, do I have to run from the battery to that switch and then back, or just from the switch back to the lights?
.
|
That depends on alot...
Is there a fuse panel with a +12v and Neg bus under the dash?
In some way.... you will need +12v from battery thru a fuse to the switch, then to all of the LED's +wires and a connection of all LED Neg wires to the Neg battery.
Do not connect LEDs in series( in + out - into+ out - ...etc) Connect them in parallel. they all must have (from switch)+12v on their + wire and All must connect their - wire in some way to the Negative battery (aka Ground or Common)