Hey,
I don't have a bracket but I have a qustion concerning prop diameter and pitch. I have a 77 200 HP V6 Johnson with a 78 V20 cuddy. It currently has a 15 x 17 prop but I only get 4400 rpm at wot. I am busy refurbishing and I am going to rebuild the fuel pumps which may be the problem but the prop seems to be a bit on the big side. I think the manual calls for 4550 to 5750 at wot which means I am only a little bit shy but it also says the 15 x 17 is the biggest prop I should use.

Any insight woud be appreciated.

Thanks in advance,
Buenos