Easier way to install starter is pull the engine.... No really...
For particles in tank... Two options.... Yes filter will handle it as long as it's not enough to plug filter..... OR you can put a few gallons of fuel (or kerosene would be much safer) in and set up a fuel polishing rig...
Bow high or low and one side high so you have a low corner...
Set up an electric fuel pump and a filter with a suction hose and a return hose.
Pump fuel from tank, through filter, and back to tank....
Pickup from the low corner and use return to wash any particles toward that corner.
Ideally filter should be on intake side of pump to protect pump.
|