[Destroyer]

Originally Posted by THEFERMANATOR

Lets say your running along and get some grass on your lower unit, not enough to cause you to come off plane, but just enough to allow the water pickup to suck air in. With a rubber impeller no big deal as it will continue to pull in the aerated water mixture, BUT your centrifigal pump could stop pumping all together as soon as some air hits it. I understand your way of thinking, but I still feel there is a reason for sticking with a tried and proven design. And it comes down if it aint broke, don't try and fix it. I'm willing to bet others have tried running centrifigal pumps on outboards, and I would bet they found out real quick they didn't work well on engines that can ingest an air water mixture at speed.

I don't necessarily disagree with you Ferm, but think about it. ANY pump, at speed, is going to have gallons and gallons of water forced into it simply by the movement of the engine through the water. So just like a rubber pump collapsing (and not doing any pumping at high rpm's) a centrifugal pump will not suffer loss of pressure if it ingests some air, because the pressure is going to be supplied 100% plus from the engine moving thru the water. In fact I'd be willing to bet that over pressure might be a bigger problem. Might have to have some kind of pressure relief valve built into the cooling system.

And there are other pump designs also.. Like gear pumps that don't suffer loss of suction with air ingestation, or moyno pumps or screw pumps. I just find it hard to believe that after 108 years of building outboard engines nothing better has been found. Sure, the materials may have changed from rubber to silicone blends, etc, but the overall basic style of the pump hasn't changed at all... and that bothers me and makes me wonder why.